ELEGRP G1215CM Patented Auto-Monitoring GFCI Replacement Plug Inline Assembly, G20CMR Manual Reset 15 Amp Grounded 3 Wires 3-Prongs for Power Tools, Lawn Equipment etc, UL Listed, 1 Pack, Black
5 sold in last 24 hours
- 【Patented Auto-Monitor Every 5 Seconds】 This is the newer model of our original GFCI plug of G1215CM. This GFCI outlet will automatically conducts a self-test (auto-monitor) every 5 seconds to ensure the GFCI is continually working to protect people from electrocution, which exceeds the UL standards of self-test frequency of 3 hours.
- 【Always Safe】 The GFCI features low power consumption and long service life. The surge protection and lightning protection function withstanding 6 kilovolt. Performed 6000+ times factory test, which is twice the testing times of UL standard. A manual reset is required after power is restored.
- 【Water Resistant GFCI】 Manual Reset GFCI (Ground Fault Circuit Interrupter) with LED indicator reaches Level IP65 water proof, waterproof rating exceeds level UL 50E-3R. Built in LED power indicator light to show when there is power.
- 【Easy to Install】 No Grounding Wire Required. Provide 2 different grommets for wiring cable 14AWG, 16AWG and 18AWG. It's necessary to press the Reset Button for initial plug in. This is the newer model of our original GFCI plug of G1215CM, the size is more smaller than the original one.
- 【Wide Application】 Durable industrial materials suit both for indoor and outdoor use in a variety of dangerous power tools, such as saws, drills, air compressors, lathes, lawn equipment, cutting machine, etc. UL & CUL Listed.
Estimated shipping
Select a product to estimate shipping.ELEGRP Powering American Homes Safely Since 2000
For 20+ years, ELEGRP's PBE Technology has been revolutionizing home power with intelligent, safe solutions. Whether for everyday living or special adventures, our products deliver unmatched reliability - exceeding expectations. Because ELEGRP doesn't just supply power...we enable life's potential.
Patented Auto-Monitor Every 5 Seconds
This is the newer model of our original GFCI plug of G1215CM. This GFCI outlet will automatically conducts a self-test (auto-monitor) every 5 seconds to ensure the GFCI is continually working to protect people from electrocution, which exceeds the UL standards of self-test frequency of 3 hours.
0.025 Seconds to Break the Circuit
When the leakage current in the circuit or load equipment or the ground neutral fault reaches the 4mA~6mA, the GFCI plug can break the circuit automatically within 0.025 Seconds (25ms).
Long Service Life
The GFCI Plug is designed to withstand 20KV, 10KA voltage surge, while UL943 only requires 6KV, 10KA.
This GFCI plug could be used normally in the operating temperature of -31 to 150.8°F (-35°C to 66°C).
Always Safe
GFCI features surge protection and lightning protection function withstanding 6 kilovolts test.
Performed 6000+ times factory tests, which is twice the testing times of UL standard.
UL Listed
Strictly tested as per or exceeds UL943 requirements.
How to Choose A Portable GFCI Plug from ELEGRP?
2-prong or 3-prong
Check if your power device is with a 2-prong 2 wire or a 3-prong 3 wire plug.
Automatic or Manual Reset Model
Automatic GFCI plug restores automatically restores power connected equipment after an initial plug-in or a power interruption. For applications where automatic restoration of power does not pose a thread or safety risk, automatic reset GFCIs can be used. Such as power pressure washers, pumps on pool spas, cooler and vending machines.
Manual GFCI plug requires the user to press the reset button after initial plug-in or a power interruption. If automatic restoration of power poses a thread or safety risk, manual reset GFCI devices are recommended. Such as dangerous power tools or lawn equipment.
GFCI Plugs or In-line GFCIs
For the GFCI plugs, the plug and GFCI are integrated.
For the In-line GFCIs, the plug is separate from the GFCI, and the plug is small, so it works better with waterproof boxes when it is used outdoor.
How to Install?
Remove the insulation from each circuit conductor approx. 1” (25mm).
Insert hot wire (black) into the hole under the brass-colored screw. Insert neutral wire (white) under the silver-colored screw. Tighten the screws clockwise.
Install the strain-relief clamp over the outer cable exterior to help prevent a pulling force from pulling the wires out from the screws that are supplying the electricity.
Install the rear cover and tighten up the screws to finish installation. There is a rubber seal around it to making this GFCI plug water Resistant.
How to Test?
To test if the GFCI plug works normally for electric leakage, please follow the steps below:
a) Remove the GFCI plug from your electrical device.
b) Plug the GFCI plug itself into a regular outlet and check if the green indicator light is ON.
c) Press the TEST button and check if the green indicator light is OFF.
d) Press the RESET button and check if the green indicator light is ON.
If the GFCI plug passes the test, then the GFCI plug is working to protect you. When the GFCI plug keeps tripping after power is restored, there might be a risk of electric leakage for your electrical device, and the GFCI plug will shut down the power immediately and protect people from possible electric shock hazards.
For your own safety, please kindly contact professional electricians and resolve the electric leakage.
Product details
| Main Specification | |
|---|---|
| PŘÍLOHA | UL or Cul |
| Výrobce | ELEGRP |
| Počet jednotek | 1 Počet |
| Amperage | 15 A |
| Značka | Elegrp |
| Počet položek | 1 |
| Napětí | 125 volts_of_alternating_current |
| Materiál | Manual Reset |
| Barva | Manual Reset |
| Typ konektoru | Vložit |
| Product information | |
| Počet balení | 1 |
| Technical Details | |
| Číslo části | 6957064536188 |
| Model | 6957064536188 |
| Typ materiálu | Manual Reset |
| Počet Poláků | 3 |
| Others | |
| Typ výrobku | Ground Fault Circuit Interrupter Outlets |
| Typ plováku | Typ B |
| Počet kabelů | 3 |