Shim Washer 15 x 21 Precision Spacers Kit 80 Pcs 0.1/0.2/0.3/0.5mm Thick
11 sold in last 24 hours
- DIN 988 Ultra-thin Washers: Can be used alone or stacked in 0.1 mm increments for precise gap adjustment, wipe out end-play and misalignment in bearings, gears or 3-D-printer rails, cut NVH and wear
- Shim Washers Kit Specifications: 15x21 | Nominal Inner Diameter: 15mm | Outer Diameter: 21mm | Thickness: 0.1/0.2/0.3/0.5mm(±0.01mm). Actual ID is greater than nominal ID
- 304 Stainless Steel: Our shim washers made of corrosion-resistant, high-strength, 304 stainless steel. It is highly suitable for outdoor equipment and humid environments
- Common Uses: The shim washer applicable to precision machine spacing, mold & fixture maintenance, vibration damping, electronics/semiconductor gear, medical & lab instruments
- Package Includes: Ultra thin flat spacers 15 x 21 x 0.1 mm, 15 x 21 x 0.2 mm, 15 x 21 x 0.3 mm, 15 x 21 x 0.5 mm, 4 sizes, each with 20pcs. KunTensile carry forward the spirit of craftsmanship, and meticulously craft every fastener, provide 7X24 technical support.
Tags |
Estimated shipping
Select a product to estimate shipping.0.1 mm / 0.2 mm / 0.3 mm / 0.5 mm • ID 3 mm – 30 mm • OD 5 mm – 40 mm • All in One Listing
One link gives you every common combo: 3x5, 3x6, 3x7, 4x6, 4x8, 4x10, 5x7, 5x9, 5x10, 6x8, 6x9, 6x10, 6x12, 6x14, 6x16, 7x10, 7x12, 7x13, 8x10, 8x11, 8x12, 8x13, 8x14, 8x16, 9x15, 10x12, 10x14, 10x16, 10x18, 12x16, 12x20, 12x18, 14x18, 14x20, 15x21, 16x20, 16x22, 17x22, 17x24, 18x22, 18x25, 20x25, 20x28, 20x30, 20x35, 22x30, 22x32, 25x30, 25x35, 28x40, 30x40 mm.
304 Stainless Steel
Made from true 304 stainless steel, these shims deliver clean, salt-safe, performance that won’t rust, flake, or contaminate your assembly
Ultra thin washer helps eliminate shaft play and reduce vibration.
Fine shimming keeps rods straight and smooth.
Adds precise spacing between worn plates.
Controls gear clearance for quiet rotation.
Thickness tolerance ±0.01 mm lets you stack or single-shim for 0.1 mm steps, so bearings, stages, molds, and carbs stay within spec without re-machining.
De-burred edges slide on without cutting gloves or O-rings; flat lapped faces give full contact for even clamp force and better heat transfer.
Where They Work
• Auto / moto carbs, shocks, starter mounts
• Drone, servo, and stepper motor end-play
• 3-D printer, laser, or optic stage leveling
• Mold and fixture wear take-up
• Electronics heat-path or shield tuning
• Medical, lab, food & pharma hardware
Please note: 304 stainless steel is typically non-magnetic when annealed. Slight magnetic attraction may occur due to cold working during manufacturing. This is normal for genuine 304 stainless steel and does not affect performance.
Product details
| Main Specification | |
|---|---|
| Výrobce | Yueqing Jingliang Hardware Products Co., Ltd |
| Počet jednotek | 80 Počet |
| Exteriér | Nerezová ocel |
| Vnější průměr | 21 millimeters |
| Washer Type | Flat |
| Značka | KunTensile |
| Typ spojovacího zařízení | Flat |
| Tloušťka položky | 0,1 milimetrů |
| Počet kusů | 80 |
| Velikost spojovacího zařízení | M15 |
| Materiál | Nerezová ocel |
| Barva | Stříbro |
| Product information | |
| Nastavit název | Shim Washer 15 x 21 Precision Spacers Kit 80 Pcs 0.1/0.2/0.3/0.5mm Thick |
| Technical Details | |
| Číslo části | KJCBDP1001-40 |
| Typ materiálu | Nerezová ocel |
| Počet položek | 80 |
| Measurements | |
| Rozměry položky | 5.12 x 5.12 x 0.12 inches |
| Others | |
| Zvýraznění položky | 304 Stainless Steel Flat Shim for Bearings Gearboxes CNC & RC Tuning or DIN 988 |
| Typ výrobku | Flat Washers |
| Název velikosti | 15 x 21 x 0.1/0.2/0.3/0.5mm |